07-24-2019 , 10:58 AM
Bluetooth Commander Pro
![[Image: RMXuS227C2QEDmzANDPCntbYK6LUmFpT2S35PbfM...20-h310-rw]](https://lh3.googleusercontent.com/RMXuS227C2QEDmzANDPCntbYK6LUmFpT2S35PbfMgC4TpVvKvKTN0k_Y2IvGGIOCjAY=w720-h310-rw)
OVERVIEW
This Bluetooth terminal app allows you to define commands and send them to multiple connected SPP (Serial Port Profile) or BLE (Bluetooth Low Energy) devices simultaneously. Remote device could be an Arduino board, phone, PC, or any other device with Bluetooth module(HC-06, etc...) or device with Bluetooth terminal. App can also listen for incoming messages and display them in HEX, string or decimal format.
COMMUNICATION
Commands could be defined in a string format or as an array of bytes (in hexadecimal format) with additional options, such as including new line at the end of the string or selecting endian mode (ordering of bytes). Periodical sending of user created command is possible. Just add a command and specify sending period in milliseconds.
Application can also listen to incoming transmissions and display incoming messages in various forms - you can choose between string, hexadecimal or decimal format. All settings and user defined commands are saved / loaded each time application is closed / opened.
OVERVIEW
This Bluetooth terminal app allows you to define commands and send them to multiple connected SPP (Serial Port Profile) or BLE (Bluetooth Low Energy) devices simultaneously. Remote device could be an Arduino board, phone, PC, or any other device with Bluetooth module(HC-06, etc...) or device with Bluetooth terminal. App can also listen for incoming messages and display them in HEX, string or decimal format.
COMMUNICATION
Commands could be defined in a string format or as an array of bytes (in hexadecimal format) with additional options, such as including new line at the end of the string or selecting endian mode (ordering of bytes). Periodical sending of user created command is possible. Just add a command and specify sending period in milliseconds.
Application can also listen to incoming transmissions and display incoming messages in various forms - you can choose between string, hexadecimal or decimal format. All settings and user defined commands are saved / loaded each time application is closed / opened.